![voodoo girder front end voodoo girder front end](https://cdn.shopify.com/s/files/1/0097/0506/2447/products/007599-xs650_830x.jpg)
If purchased with an axle, the axle bushings are included as well and can be modified to use metric axles should you need. The RELIC can be shipped with a standard 3/4" axle kit. allowing stand-offs to be used when mounting your brake hardware. The bottom two holes on the leg gussets are 5/16 and 3/8 I.D. See our website for a shock or use your own.Īlso built into the RELIC are mounting points for a variety of aftermarket "Springer type" brake systems. Spring rate is up to your personal preference but we have found that 350 to 400 lbs is a great starting point for most bikes up to 500 lbs.
![voodoo girder front end voodoo girder front end](https://1.bp.blogspot.com/-sQMrMnM12EQ/VrPTQMOKpPI/AAAAAAAAa20/BmofZaYqZuM/s1600/relic_dimensions.png)
The RELIC accepts most any performance mountain bike shock that are 180 to 200 mm (7.5" to 8" eye to eye) with a minimum 2 inches (25 mm) of travel. There are THREE different widths!! Narrow, Mid and Relic-X which is our widest!!! And wildest!!!! Use a Pro-One bottom bearing race with stop tab (Sold Separately) and don't worry about drilling and tapping holes. Adjust both with very little effort and switch back again when you are ready!Īccommodations for an internal fork stop have been provided. There are so many innovations on this stunning front end! Not satisfied with your rake? No problem! Same goes for the fork length.